Hose Floats
Durable & easy to attach
Available for hose diameters from 1.5" to 6."
ACME Hose Floats are produced by a urethane "sandwich" process, with a hard, damage-resistant outer shell and a light, high-floatation closed cell foam inner section. Half sections are easily joined around the hose by means of a Quick Snap, gear-type stainless steel hose clamp. Only a screwdriver is required to tighten the clamp after snapping it into place. Unlike hollow plastic-type floats, ACME Hose Floats will maintain virtually full flotation capacities even though damaged almost to destruction.
| Hose Size | Inner Diam. | Outer Diam. | Length | Floating Capacity* |
| 1.5" Standard | 1-11/16" | 6" | 8" | 6.3# |
| 2" Standard | 2-3/16" | 6" | 8" | 5.9# |
| 2.5" Standard | 2-3/4" | 7" | 10" | 10.4# |
| 3" Standard | 2-3/4" | 7" | 10" | 9.3# |
| 3" Heavy Duty | 3-1/4" | 8" | 12" | 16.1# |
| 4" Standard | 4-1/4" | 8" | 12" | 13.3# |
| 4" Heavy Duty | 4-3/4" | 10" | 12" | 23.0# |
| 6" Standard | 6-1/4" | 10" | 12" | 18.0# |
| 6" Heavy Duty | 6-3/4" | 13" | 12" | 37.6# |
| Cable Float | 1-1/8" | 8" | 12" | 19.2# |